Remember you are adding the initial turns to the turns that the awning gets as it unrolls.
Rv awning spring turns.
Reinsert the end cap into the awning arm and install the bolt.
Dometic sells a tool to assist with winding the spring but you can do it using.
Rv awning tension adjustment.
I recently replaced the fabric on the awning and allowed the springs to completely unwind.
The spring is prewound in a direction that places the awning under tension when retracted and then tensions further as the awning is deployed.
Of turns on the springs.
Up to 12 ft long awning 8 turns 13 14 ft 9 turns 15 16 ft 10 turns 16 5 18ft.
Billarf on 10 14 08 01 15pm when you change awning fabric replace a worn rt.
During the install i hate to say i lost track of the no.
Can you tell me how many turns i read more.
Different manufacturers will use different springs and the turns required is based on the age and wear of the hardware.
I would start with just a couple then test it and do one more at a time testing each turn.
Generally it will take six turns for awning lengths of 8 to 12 feet seven turns for 13 to 14 feet eight turns for 15 to 16 feet 10 turns for 17 to 18 feet 11 turns for 19 to 21 feet and 12 turns for 22 to 25 feet.
The process is fairly simple but having someone to assist you in making the adjustments makes it easier.
I have an older probably 18 years old dometic awning on a r vision camper.
Has your rv awning been sagging.
The awning is a 15 foot a e dometic.
You always in the replacement procedure have to re tension the spring in the torsion assembly.
I realize the need for safety when working with the springs.
I am afraid i might have them too tight.
I have completely no idea if it was 8 turns on one side or 1 turn per ft of length or what.
If you over do it the spring will break.
After a few years or sooner if your awning sees heavy use your rv awning may start to look a little limp or saggy.
Just replaced my awning fabric today.
See our channel page for link the home on the road series consists of three 2 dvd set.
In most cases readjusting the tension in the springs solves the problem.
Turn the spring top away from the coach.
12 turns 19 ft up 13 turns.
Remove the cotter pin that was installed in step 2 place the roll out lever to the retract position and roll up the awning.